The Essential Post-Construction Cleaning Checklist

by oneclickinfo21 - May 31, 2022

Essential-Post-Construction-Cleaning-ChecklistEvery construction job is messy, as there’s a lot of debris flying everywhere. Because of it, the house can seem like it’s in a worse condition than it was before the project. In Anchorage, AK, people rely on renovation and construction cleaning experts to help them deal with the leftover mess. This way they get a perfectly clean and renovated home in no time.

However, for those of you who like to take on the challenge and do it yourself, we’ve prepared a detailed checklist with all of the areas that require thorough cleaning, so read on!

What should a post-construction cleaning checklist include?

Once you properly prepare for the post-renovation cleaning, here are all the steps you should take to ensure that every area is well-inspected:

1. Dispose of the large debris

If there are any tools, materials, and visible debris left after the construction, be sure to properly store them away for later. You shouldn’t throw the debris and the leftover materials in the garbage, as there are facilities that recycle them.

Grab a few boxes, plastic bags, or metal containers and sort everything. Clearing out the space will help you see how much cleaning needs to be done. Also, with the materials out of the way, you’ll be able to move freely and reach every nook and cranny.

2. Start from the ceiling fixtures

The fastest way to clean is from top to bottom, as the dust flies down. However, when you’re dealing with construction dust, you should start at the very top of the room. Bring in the vacuum cleaner and run it over every inch of the ceiling. Then, clean the ceiling fixtures with a damp cloth and a product of your preference.

Once you’re done with the upper parts of the room, give the same vacuum treatment to your walls and floors, as this helps remove a large amount of dust. Note that you’ll likely use the vacuum cleaner again, so keep it nearby.

3. Scrub the walls and wall fixtures

During the construction, the dust can stick to the walls along with dirt and sometimes mud. Vacuuming the walls isn’t enough, so make sure to scrub them using appropriate chemicals. However, don’t forget the switches, doorknobs, frames, and molding. These are often overlooked but frequently used during the day.

4. Check the vents and grates

Having construction dust in the vents means you’ll be breathing it in for a while, and this is very dangerous. Make sure that you clean all your vents and grates and also change the air filter. If there were large amounts of dust during the project, check the duct and clean it as well.

5. Thoroughly disinfect every surface

This applies not only to the exterior but also to the interior of the cabinets, counters, and drawers. Construction dust can hide anywhere, so you’ll need to be thorough. After cleaning the house, sanitize every surface and leave the windows open for an hour. To finish off post-construction cleaning, vacuum, and mop the floors one more time.

What-should-a-post-construction-cleaning-checklist-includeDo you live in Anchorage, AK, and need help with renovation and construction cleaning?

If all of this sounds like too much work, that’s because it is. Cleaning after a big renovation project is very important, and if you’re looking to hire someone to do it, then White Lilac is the best choice for you! We work with cleaners in Anchorage and surrounding areas that specialize in this type of work.

They have the right skill set and the equipment to make sure that every inch of your freshly renovated home is clean and healthy. Instead of wasting your energy scrubbing and washing, take a relaxing day off and visit the Anchorage Museum with your family and loved ones. Contact us today and we’ll send someone over right away!

 



Call Now Button